Han Bao

Ph.D. in Mechanical and Aerospace Eng., Manufacturing/Design, University of New South Wales, (1976)

M.Sc. in Industrial Engineering, University of New South Wales, (1972)

B.S. in Industrial Engineering, University of New South Wales, (1969)

Research Interests

Design MethodologyDesign OptimizationCost optimization

Articles

Dean, A., Reina, J. and Bao, H. P. (2008). Identification of Supplementary Metrics to Sustain Fleet Readiness from a Maintenance Perspective. Journal of Naval Engineers 120 (2) , pp. pp. 32-39.

Abdelsalam, H. M.E.. and Bao, H. P. (2007). Re-sequencing of Design Processes with Activity Stochastic Time and Cost: An Optimization-Simulation Approach. Journal of Mechanical Design, ASME 129 , pp. 150-157.

Bao, H. P., Uppuluri, S., Arityasari, M. and Manmek, S. (2006). A Strategy for Product Reuse in Support of Life Cycle Engineering. International Journal of Agile Manufacturing 9 (2) , pp. 3-12.

Abdelsalam, H. and Bao, H. P. (2006). A Simulation-based Optimization Framework for Product Development Cycle Time Reduction. IEEE Transaction on Engineering Management 53 (1).

Kulkarni, U. and Bao, H. P. (2003). Close loop cost equation for objects manufactured by milling. Journal of Manufacturing Science and Engineering 125 (3) , pp. 436 – 448.

Mudigonda, A., Bao, H. P. and Soundar, P. (1994). Training a Neural Network to learn the Inverse Kinematics Mapping of a Rhino Robot. International Journal of Flexible Automation and Integrated Manufacturing 4 (2) , pp. 327-338.

Bao, H. P., Soundar, P. and Yang, T. (1994). Integrated Approach to Design & Manufacture of Shoe Lasts for Orthopedic Use. International Journal of Computers and Industrial Engineering 26 (2) , pp. 411-421.

Bao, H. P. and Ainumtip, J. (1992). A Data Compression Technique for Representation and Machining of Sculptured Surfaces. Mech. Eng. Transactions of the Institution of Engineers ME17 (3) , pp. 171-177.

Bao, H. P. and Yim, H. (1992). Tool Path Determination for End Milling of Flat Star Shaped Polygonal Surfaces. Transactions of North American Research Institution of Society of Mechanical Engineers 20 , pp. 151-158.

Bao, H. P. and Liou, K. (1990). Space Maps Manipulation for Robot Motion Planning. International Journal of Computers and Industrial Engineering 18 (2) , pp. 235-245.

Bao, H. P. (1989). On the Machining of Cylindrical Objects with Complex Curvature. Journal of Mechanical Working Technology 20 , pp. 17-24.

Bao, H. P. (1988). An Expert System for SMT Printed Circuit Board Design for Assembly. Manufacturing Review, American Society of Mechanical Engineers 1 (4) , pp. 275-280.

O'Grady, P. J.., Bao, H. P. and Lee, K. H.. (1987). Issues in Intelligent Cell Control for Flexible Manufacturing Systems. Computers in Industry 9 , pp. 25-36.

Badalamenti, J. and Bao, H. P. (1986). Simulation Modeling of Robotic Assembly Cell Incorporating Carousel. Material Flow 3 (1-3) , pp. 121-130.

Bao, H. P. (1984). Flexible Equipment Procurement Scheme. Computer Integrated Manufacturing and Robotics, American Society of Mechanical Engineers, PED 13 , pp. 177-184.

Bao, H. P. (1984). Office Design on a Microcomputer. Journal of Computers in Education, American Society of Engineering Educators 4 (3) , pp. 4-7.

Bao, H. P. (1980). Application of Dynamic Programming to Optimize Tool Replacement Schedule for Multi Tool Operations Involving Distributed Tool Lives. Journal of Mechanical Design, ASME Transactions 102 (3) , pp. 446-451.

Stevenson, M. G.., Bao, H. P. and Montgomery, J. R.. (1979). Measurement of the Strain Rate in the Primary Deformation Zone in the Machining of Three Metals. Seventh North American Metal Working Research Symposium , pp. 56-67.

Bao, H. P. and Stevenson, M. G.. (1976). An Investigation of Built Up Edge Formation in the Machining of Aluminum. International Journal of Machine Tool Design and Research 16 , pp. 165-178.

Bao, H. P. and Stevenson, M. G.. (1976). A Basic Mechanism for Built Up Edge Formation in Machining. Annals of the International Institution for Production Engineering Research (C.I.P.R.) 25 , pp. 102-115.

Book Chapters

Bao, H. P. (1988). Chapter 7: Group Technology Classification and Coding for Electronics Components; Productivity and Quality Improvement in Electronics Assembly McGraw-Hill Pub.

Conference Proceeding

Bao, H. P. and Bodapati, S. (2011). Development of sustainable Indicators for products and Processes Washington, DC: 31st Computer & Information in Engineering, ASME Conference 2011.

Bao, H. P. (2011). Unplanned Maintenance: Strategies to minimize Costs and Optimize Makespan Busan, Korea: 2nd Annual World MarineTech Summit.

Fergen, P., Grimsley, J., Hou, G. J.W.., Bao, H. P. and Dean, A. (2009). Selection of Pressure Equation for Preliminary Planing Hull Design Using Analytical Hierarchy Process Linthicum, Maryland: American Society of Naval Engineers’ High Performance Marine Vehicles.

Fergen, P., Grimsley, J., Hou, G. J.W.., Bao, H. P. and Dean, A. (2009). Selection of Pressure Equation for Preliminary Planing Hull Design Using Analytical Hierarchy Process Linthicum, MD: ASNE High Performance Marine Vehicles Symposium.

Wang, F. and Bao, H. P. (2009). Vessel Power Prediction and its Impact on Emission Inventory West Lafayette, Indiana: Proceedings of the ASME 2009 International Manufacturing Science and Engineering.

Dean, A. and Bao, H. P. (2009). Creating the Next Generation Shipbuilding and Repair Workforce: Combating the Challenges of Non-Traditional Competition, Retention, and Aging to Maintain a Vital Strategic Asset San Diego, California: Fleet Maintenance & Modernization Symposium 2009.

Mohammad, Y. and Bao, H. P. (2009). Enterprise Wide Cost Modeling: A Systems Engineering Perspective St Louis, Missouri: 2009 International Society of Parametric Analysis.

Wang, F. and Bao, H. P. (2009). Emission Inventory Assessment for a Container Vessel Phoenix, Arizona: Proceedings of the IEEE’s International Symposium on Sustainable Systems and Technology.

Bao, H. P. and Jaishankar, D. (2008). Optimal Preventive Maintenance for a Device submitted to Random and Deteriorating Failure IEEE International Conference on Industrial Engineering and Engineering Management.

Phadke, H., Bao, H. P. and Dean, A. W. (2008). An Economic Model for the Maintenance of a Device Submitted to Major and Minor Repairs American Society of Mechanical Engineers International Conference on Manufacturing Science and Engineering.

Phadke, H. and Bao, H. P. (2008). An Economic Model for the Maintenance of a Device submitted to Minor and Major Repairs Northerwestern University, Chicago: ASME International Conference on Manufacturing Science and Engineering.

Bao, H. P. and Lai, C. (2008). Disassembly Planning and Timing Through Petri Net Approach Northerwestern University, Chicago: ASME International Conference on Manufacturing Science and Engineering.

Dean, A., Reina, J. and Bao, H. P. (2007). Identification of Supplementary Metrics to Sustain Fleet Readiness from a Maintenance Perspective Pavilion Convention Center, VB, Virginia: 8th Fleet Maintenance Symposium 2007.

Bao, H. P. and Multani, H. (2007). Energy-based Life Cycle Assessment of Industrial Products (pp. 122-127) Orlando, Fl: Proceedings of the 2007 IEEE International Symposium on Electronics and the Environment.

Anityasari, M., Kaebernick, H. and Bao, H. P. (2005). Reuse in action: a study of “trade-in” practices of electrical appliances in Indonesia Bali: Proceedings of 1st International Conference on Operations and Supply Chain Management.

Bao, H. P. (2005). Life Cycle Engineering: Dealing with Risks and Uncertainties Adelaide: Keynote paper, International Manufacturing Leadership Forum 2005.

Bao, H. P. (2005). New Generation of Cost Models for Product Design Adelaide: International Manufacturing Leadership Forum 2005.

Anityasari, M., Bao, H. P. and Kaebernick, H. (2005). Evaluation of Product Reusability based on a Technical and Economic Model: A case study of televisions New Orleans, Louisiana: Proceedings of the International Symposium on Electronics & the Environment.

Verma, A. K.., Bao, H. P. and Nagarathman, K. (2002). Comparison of Cost Factors in Laser Processing of Materials and traditional Metal Cutting Processes New Orleans: ASME International Congress.

Bao, H. P. and Kulkarni, U. (2002). Process-based cost modeling for engineering applications Dresden: International Conference on Flexible Automation and Intelligent Manufacturing.

Bao, H. P., Samareh, J. A.. and Weston, R. P.. (2002). Predicting Production Costs for Advanced Aerospace Vehicles SAWE paper No. 3246, Category No. 11.

Bao, H. P. and Samareh, J. A.. (2000). Affordable Design: A Methodology to Implement Process-Based Manufacturing Cost Models into the Traditional Performance-Focused Multidisciplinary Design Optimization Long Beach, CA: 8th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization.

Kulkarni, U. and Bao, H. P. (2000). Process Reengineering a Chemical Plant Equipment Maintenance Activity San Antonio, Texas: Production and Operations Management Conference.

Abdel-Salam, H. and Bao, H. P. (2000). Solving the Project Time-Cost Trade Off Problem through an Integrated Engineering Computation environment San Antonio, Texas: Production and Operations Management Conference.

Hou, G. and Bao, H. P. (1999). Experience of a Graduate Program with Emphasis in Design and Manufacturing at Old Dominion University Xi’an: International Conference on Advanced Manufacturing Technology.

Pandya, S. Y.. and Bao, H. P. (1998). Experiences with the Industrial Manufacturing Productivity Improvement Program at Old Dominion University 19th Annual Conference of the American Society of Engineering Management.

Bao, H. P. and Ozkan, M. (1998). On the use of a digital camera to measure 3-D objects (pp. 881-886) 1998 Pacific Congress on Manufacturing & Management.

Bao, H. P. and Wright, R. S.. (1997). Modeling the Newspaper Printing Process 1997 Annual Meeting of the Decision Science Institute.

Pandya, S. and Bao, H. P. (1996). The X-NFR Method for determining Manufacturing Complexity of newly developed Materials (pp. 385-385) Texas: American Society of Engineering Management Annual Conference.

Bao, H. P., Soundar, P. and Pandya, S. Y.. (1995). Productivity Improvements of High-Volume Packaging Operation (pp. 195-200) Proceedings of 1995 ASEM Conference.

Pandya, S. Y.. and Bao, H. P. (1995). STEP Applications in a Database Management Environment (pp. 11-18) Proceedings of 1995 ASEM Conference.

Richards, L. D.., Bao, H. P., Unal, R., Steir, F., Jacobs, D. A.., Reed, B. M.. and Fleischer, M. (1995). Graduate Program Structures in Engineering Management at ODU (pp. 2076-2082) Anaheim, CA: Proceedings of 1995 ASEE Annual Conference.

Soundar, P. and Bao, H. P. (1994). Concurrent Design of Products for Manufacturing Systems Performance (pp. 233-240) Dayton, Ohio: Proceedings of International Engineering Management Conference.

Bao, H. P. and Soundar, P. (1993). Role of Rapid Modeling in Cost Analysis of Manufacturing Systems (pp. 97 - 102) University of South Australia: Proceedings of Australian Conference in Manufacturing Engineering.

Bao, H. P. (1993). A Taxonomy of Surface Mount Technology Devices and its application to Manufacturability Rating of SMT Printed Circuit Board Assemblies (pp. 983-994) University of Limerick: Proceedings of Third International Conference in Flexible Automation and Information Management.

Soundar, P. and Bao, H. P. (1993). Computer-Aided Design and Manufacture of Cylindrical Objects with Compound Curvature (pp. 189-199) University of Limerick: Proceedings of Third International Conference in Flexible Automation and Information Management.

Bao, H. P. (1991). Classification and Coding of SMT Devices: Part 2 Processes and Equipment Electronics Industry Division News.

Bao, H. P. and Li, C. (1991). Representation of SMD in Computerized Formats (pp. 98-112) Proceedings of Electricon'91.

Bao, H. P. (1990). Classification and Coding of SMT Devices: Part 1 Part Family Electronics Industry Division News.

Bao, H. P. (1990). A Computerized Technique for Assessing the Producibility of PCB's Scottsdale, Arizona: Fifth International Electronics Assembly Conference.

Bao, H. P. (1989). Automated Orthopedic Shoe Last Production (pp. 151-152) RESNA 12th Annual Conference.

Bao, H. P. (1989). PCB DFM: A Rule Based Expert System for Rating PCB Assembly San Jose, California: 4th International Electronic Assembly Conference.

Bao, H. P. (1988). Computer Aided Design and Manufacture of Custom Orthopedic Shoes Washington, DC: 1988 Symposium on Pedorthic Management of Diabetic Foot Disorders", Prescription Footwear Association.

Bao, H. P. (1988). Rating SMT Printed Circuit Assembly for Manufacturability (pp. 87-93) Las Vegas, Nevada: EXPO SMT International Conference.

Bao, H. P. (1988). Producibility Considerations for Printed Circuit Board Assembly (pp. 61-65) St Louis, Missouri: IIE Fall Conference.

McKirachan, F. and Bao, H. P. (1988). Producibility Considerations for Surface Mount Technology Printed Circuit Card Assembly Newport, Rhode Island: Third International Conference on Product Design for Manufacture and Assembly.

Bao, H. P. (1986). Group Technology Applications in Electronics Manufacturing IE News, Electronics Industry Task Force.

Sanii, E. T.., Bao, H. P. and Lee, K. H.. (1986). Flexible Manufacturing System at North Carolina State University Greenville, South Carolina: AM 86 Conference.

Bao, H. P., Sanii, E. T.. and Birch, L. (1986). Role of Simulation in the Decision Support System for a Flexible Manufacturing System Greenville, South Carolina: AM 86 Conference.

Bao, H. P. and Reodecha, M. (1986). An Approach To Appraising The Manufacturability of a Printed Wiring Board Assembly Newport, Rhode Island: First International Conference on Product Design for Assembly.

Bao, H. P. (1985). Computer Assisted Manufacturability Rating of Printed Wiring Board Assemblies Chicago, Illinois: International IIE Conference.

Reodecha, M. and Bao, H. P. (1985). Development of a Classification and Coding System for Electronic components: The First Step Toward Process Planning in Electronic Manufacturing (pp. 167-175) Computer Aided/Intelligent Process Planning, American Society of Mechanical Engineers, PED.

Bao, H. P., Lee, K. H.. and Sanii, E. T.. (1985). Study of Priority Dispatching Rules for a Robot and Carousel System Involved in Automated Flexible Assembly Works (pp. 151-157) 12th Conference of the NSF Production Research and Technology Program.

Bao, H. P. (1984). Computer Aided Process Planning (pp. 619-629) Charlotte, North Carolina: International Conference in Robotics and Factories of the Future.

Bao, H. P. (1984). Electronics Manufacturing Education Program at North Carolina State University Raleigh, North Carolina: Electronics Manufacturing Technologies and Systems, Society of Manufacturing Engineers, EE84 823.

Bao, H. P. (1984). Selection of Material Handling Equipment in a Flexible Layout Sydney: International Conference in Automated Manufacturing.

Bao, H. P. and Liou, K. (1984). Design and Implementation of an FMS's physical Model Orlando, Florida: Sixth National Conference in Computers and Industrial Engineering.

Bao, H. P. and Olling, G. (1982). Manufacturing Logic for Generative Process Planning Pittsburgh, Pennsylvania: International Technology Congress.

Bao, H. P. (1980). CAPP and AUTAP: Two Possible Educational Tools for Teaching Computerized Process Planning Systems Orlando, Florida: Third National Conference on Computers in Industrial Engineering.

Bao, H. P. (1979). Determination of Least Cost Tool Replacement Policy for Multi Tool Operations Chicago, Illinois: Second National Conference in Computers and Industrial Engineering.

Bao, H. P. (1977). Further Experimental Studies of Strain Rates in Steady State Machining (pp. 116-121) Adelaide: Second Australian Conference on Manufacturing Engineering.

Presentations

Hentosh, P., Phadke, H., Bao, H. P. and Knisley, S. (October , 2011). Modulation of PC3 cell growth on titanium surfaces with altered surface roughness and electric current Poster BMES 2011 Hartford, Conn.

Bao, H. P. and Patil, A. (April , 2011). Marine pollution & Energy Calculator Annual Ship Operators Co-Op program (SOCP) Dania Beach, Florida.

Bao, H. P. (October 22, 2009). Research of the Ship Maintenance, Repair and Operations Institute Innovation Fair & Incubator Open House Newport News.

Bao, H. P. (November , 2006). Life Cycle Assessment of Industrial Products .

Bao, H. P. (March 21, 2005). Mechanical and Manufacturing Education in the U.S. .

Bao, H. P. (June 25, 2003). Cost Optimization of HPM’s Primary Structure .

Bao, H. P. (February 19, 2003). Cost Uncertainty Analysis for Aircraft Parts .

Bao, H. P. (December 2, 2002). Cost Study of HPM in OASIS Development System .

Bao, H. P. and Kulkarni, U. (July 15, 2002). Process-based cost modeling for engineering applications International Conference on Flexible Automation and Intelligent Manufacturing Dresden, Germany.

Bao, H. P. and Ozkan, M. (August , 1998). On the use of a digital camera to measure 3-D objects 1998 Pacific Congress on Manufacturing & Management Brisbane, Australia.

Bao, H. P. (February 10, 1997). Laser Technology Applied to Footwear Industry Presentation to Norfolk Round Table Webb Center.

Bao, H. P. (October 16, 1996). Statistical Principles for Engineers Technical Meeting of the Hampton Roads Manufacturing Engineering Society, Hampton Roads Chapter 217 .

Bao, H. P. (March 6, 1996). Application of the Normalized Factor Rating Method to the Selection of Materials with An Emphasis on Manufacturing Risks Meeting of the Costing N-Team .

Bao, H. P. (February , 1994). Research in Process Planning Research Seminar .

Bao, H. P. and Soundar, P. (November , 1993). Role of Rapid Modeling in Cost Analysis of Manufacturing Systems Australian Conference in Manufacturing Engineering .

Bao, H. P. (November , 1993). On Laser Scanning Adelaide, Australia.

Bao, H. P. (June , 1993). A Taxonomy of Surface Mount Technology Devices and its application to Manufacturability Rating of SMT Printed Circuit Board Assemblies Third International Conference in Flexible Automation and Information Management Ireland.

Bao, H. P. and Soundar, P. (June , 1993). Computer-Aided Design and Manufacture of Cylindrical Objects with Compound Curvature Third International Conference in Flexible Automation and Information Management Ireland.

Bao, H. P. (November , 1992). Rapid Modeling Technique Chesapeake, Virginia.

Bao, H. P. (July , 1990). Measurement, Contour Plotting, and Compact Data Storage of Three Dimensional Surface Melbourne, Australia.

Bao, H. P. (July , 1990). Setting Up CIM Systems in Universities Australia.

Bao, H. P. and Smith, R. (April , 1990). Automation of Orthopedic Shoe Design and Manufacture Prosthetics Research Study Seattle, Washington.

Bao, H. P. (May , 1989). PCB DFM: A Rule Based System for Rating SMT PCB Assembly Menlo Park, California.

Bao, H. P. (February , 1989). Research Issues in Surface Modeling Industrial Engineering Seminar .

Bao, H. P. (January , 1989). A Review of state-of-the-art in Instantaneous Manufacturing Los Angeles, California.

Bao, H. P. (January , 1989). Orthopedic Footwear Production Joint Meeting of the St. Louis Chapters of the Institute of Industrial Engineers and the American Society for Quality Control St. Louis, Missouri.

Bao, H. P. (May , 1988). Manufacturability Rating of Printed Circuit Boards Atlanta, Georgia.

Bao, H. P. (March , 1988). Parts and Process Data Base for Electronics Manufacturing Columbia, Missouri.

Bao, H. P. (November , 1987). CAD/CAM for Orthopedic Footwear St. Louis, Missouri.

Bao, H. P. (November , 1985). Manufacturability Rating of Printed Wiring Board Assemblies Industrial Engineering Seminar .

Bao, H. P. (July , 1985). Flexible Manufacturing Cell Design Johnson City, Tennessee.

Bao, H. P. (January , 1985). Manufacturing Logic for Generative Process Planning Industrial Engineering Seminar .

Bao, H. P. (August , 1984). A Space and Occupancy Code for Facility Graphic Support Research Seminar Sydney, Australia.

Bao, H. P. (May , 1983). Office Layout Annapolis, Maryland.

Bao, H. P. (January , 1981). Comparison Between Two Types of Computerized Process Planning Systems Industrial Engineering Seminar .

Bao, H. P. (October , 1980). Generative Process Planning Industrial Engineering Seminar Florida.

• Award of ASME Faculty Advisor,
• Award of Excellence in Industrial Partnering, College of Engineering and Technology, Old Dominion University
• Faculty Development Project Award, University of Missouri-Columbia
• Halliburton Faculty Award, University of Missouri-Columbia
• International Travel Award, NSF
• International Travel Award, Research Office, University of Missouri-Columbia
• Travel Grant, Center for Manufacturing Management and Automation, University of South Australia
• •Honorary Member of the International Advisory Board for Graduate Program in Manufacturing Management, University of South Australia, in Kuala Lumpur, and Singapore
• 1994: ASEE/NASA Faculty Fellowship,
• 1990: Engineering Research Fellowship, University of Missouri-Columbia
• 1987: Listed as speaker in SME Speakers Directory,
• 1984: Listed in Who's Who in Technology Today,
• 1973: Dean's Research Scholarship for Ph.D. Study,