Petros Katsioloudis

Ed.D. in Technology Education, North Carolina State University, (2007)

M.Ed. in Technology Education, California University of Pennsylvania, (2004)

B.S. in Industrial Technology, California University of Pennsylvania, (2003)

A.S. in , Pennsylvania Gunsmith School, (1998)

Close Circuit Rebreather Diver (CCR)

Sponsoring Organization: IANTD

Date Obtained: 2010-05-01

Technical Scuba Diving Instructor

Sponsoring Organization: IANTD

Date Obtained: 2009-10-01

Full Cave Diving Certification

Sponsoring Organization: International Nitrox and Technical Diving (IANTD)

Date Obtained: 2009-03-15

DiveMaster

Sponsoring Organization: Professional Association of Diving Instructors PADI

Date Obtained: 2008-06-15

CPR Certified

Sponsoring Organization: Red Cross

Date Obtained: 2008-06-01

First Aid Certified

Sponsoring Organization: Red Cross

Date Obtained: 2008-06-01

Expertise

Research Interests

Materials Testing, Pedagogical Techniques, Non-conventional Learning Styles.

Articles

Katsioloudis, P. and Stefaniak, J. (2018). Effectiveness of Drafting Models for Engineering Technology Students and Impacts on Spatial Visualization Ability: A Meta-Analysis and Consideration of Critical Variables. The Journal of Technology Education 29 (2) , pp. 91-106.

Katsioloudis, P. and Jones, M. (2017). A Comparative Analysis of Holographic, 3D Printed and PC Generated models and implications on Engineering Technology students’ Spatial Visualization Ability. The Journal of Technology Education.

Jovanovic, V., Popescu, O., Katsioloudis, P., Djuric, A. M., Tomovic, M. M., Stout, T. and Lagesse, R. R. (2017). Career and Technical Education and Its Relation to Engineering Technology Pathways in Marine Mechatronics. Technology Interface International Journal 17 (2) , pp. 50-57.

Katsioloudis, P. and Jones, M. (2017). Effects of Light Intensity on Spatial Visualization Ability. The Journal of Technology Studies.

Katsioloudis, P. (2017). Impacts of Effective Temperature on Sectional View Drawing Ability and Implications for Engineering and Technology Education Students. Journal of STEM Education: Innovations and Research 18 (2) , pp. 73-78.

Katsioloudis, P., Jones, M. and Jovanovic, V. (2017). Impacts of Music on Sectional View Drawing Ability for Engineering Technology Students as measured through Technical Drawings. Engineering Design Graphics Journal 80 (2) , pp. 1-17.

Stefaniak, J., Katsioloudis, P. and Matrood, B. (2017). Toys redesigned: the intersection of industrial technology and service-learning principles. The Technology and Engineering Teacher 77 (1) , pp. 32-36.

Katsioloudis, P., Dickerson, D. L., Jovanovic, V. and Jones, M. (2017). Use of Dynamic Visualizations for Engineering Technology and Science Education Students and Implications on ability to correctly create a sectional view sketch. The Journal of Technology Education 28 (1) , pp. 19-36.

Katsioloudis, P., Jones, M. and Jovanovic, V. (2017). Use of Virtual Reality head-mounted displays for Engineering Technology Students and Implications on Spatial Visualization ability as measured through rotational view drawings, Engineering . Design Graphics Journal.

Katsioloudis, P., Jovanovic, V. and Jones, M. (2016). Application of Visual Cues on 3D Dynamic Visualizations for Engineering Technology Students and Effects on Spatial Visualization Ability: A Quasi-Experimental Study. Engineering Design Graphics Journal 80 (1) , pp. 1-17.

Katsioloudis, P. (2015). Aligning Technology Education Teaching with Brain Development. Journal of STEM Education: Innovations and Research 16 (2) , pp. 41-45.

Ren, S., McKenzie, F. D., Chaturvedi, S. K., Prabhakaran, R., Yoon, J., Katsioloudis, P. and Garcia, H. (2015). Design and Comparison of Immersive Interactive Learning and Instructional Techniques for 3D Virtual Laboratories. Presence: Teleoperators and Virtual Environments 24 (2) , pp. 93-112.

Katsioloudis, P., Dickerson, D. L., Jovanovic, V. and Jones, M. (2015). Evaluation of Static Vs. Dynamic Visualizations for Engineering Technology Students and Implications on Sectional View Sketching: A Quasi-Experimental Study. Engineering Design Graphics Journal 79 (1) , pp. 14-28.

Katsioloudis, P. and Jones, M. (2015). Using Computer-Aided Design Software and 3D Printers to Improve Spatial Visualization. The Technology and Engineering Teacher Journal 74 (8) , pp. 14-20.

Katsioloudis, P., Jovanovic, V. and Millie, J. (2014). A Comparative Analysis of Spatial Visualization Ability and Drafting Models for Industrial, and Technology Education Students. The Journal of Technology Education 26 (1).

Spellman, Z., Jones, M. and Katsioloudis, P. (2014). Outreach partnerships: To encourage or increase stem literacy in the classroom. The Technology and Engineering Teacher Journal 74 (3) , pp. 30-33.

Hathcock, S., Dickerson, D. L., Eckhoff, A. and Katsioloudis, P. (2014). Scaffolding for creative product possibilities in a design-based STEM activity. Research in Science Education.

Katsioloudis, P. and Jovanovic, V. (2014). Spatial Visualization Ability and Impact of Drafting Models: A Quasi-Experimental Study. Engineering Design Graphics Journal 78 (2).

Katsioloudis, P., Fantz, T. and Millie, J. (2013). A Comparative Analysis of Point of View Modeling for Industrial and Technology Education Courses. The Journal of Technology Education 25 (1) , pp. 70-81.

Katsioloudis, P. and Jones, M. (2013). Assistive Technology: Fixing Humans. The Technology and Engineering Teacher Journal 72 (7) , pp. 26-31.

Judge, S., Bobzien, J., Maydosz, A., Maydosz, A. and Katsioloudis, P. (2013). The Use of Visual-based Simulated Environments in Teacher Preparation. Journal of Education and Training Studies 1 (1) , pp. 88-97.

Katsioloudis, P. and Fantz, T. (2012). A Comparative Analysis of Preferred Learning and Teaching Styles for Engineering, Industrial and Technology Education Students and Faculty. The Journal of Technology Education 23 (2) , pp. 61-69.

Katsioloudis, P. and Jones, M. (2012). Green Transportation for a Green Earth. The Technology and Engineering Teacher Journal 71 (7) , pp. 19-25.

Fantz, T. and Katsioloudis, P. (2011). Analysis of Engineering Content within Technology Education Programs. Journal of Technology Education 23 (1) , pp. 13.

Katsioloudis, P. and Moye, J. (2011). Future Critical Issues and Problems Facing Technology and Engineering Education in the Commonwealth of Virginia. The Journal of Technology Education 23 (2) , pp. 6-24.

Katsioloudis, P. and Jones, M. (2011). Rethinking the Development of Weapons and Their Impact. The Technology and Engineering Teacher Journal 71 (3) , pp. 12-17.

Watson, G. S., Katsioloudis, P. and Papelis, Y. E. (2011). A Simulation architecture to promote information modeling, planning, scheduling and decision-making for port logistics within a game environment. International Journal of Agile Manufacturing 11 (2) , pp. 1-6.

Katsioloudis, P. and Watson, G. S. (2010). The VisPort Project: Visualization of Port Logistics. The Technology and Engineering Teacher Journal 70 (4) , pp. 71-99.

Katsioloudis, P. (2010). Breathing like a fish. The Technology Teacher Journal.

Moye, J. and Katsioloudis, P. (2010). Improve or Perish. The Technology and Engineering Teacher Journal 70 (6) , pp. 24-28.

Katsioloudis, P. (2010). Understanding Materials. The Technology Teacher 69 (8) , pp. 5-11.

Katsioloudis, P. (2010). Identification of quality visual-based material in Technology Education. Journal of STEM Education 47 (1) , pp. 71-99.

Katsioloudis, P. (2009). Green Ships: Keeping the Oceans Blue. The Technology Teacher Journal 69 (5) , pp. 5-9.

Katsioloudis, P. (2009). Transportation of the Future: Understanding Port Logistics. The Technology Teacher 69 (1) , pp. 7-10.

Katsioloudis, P. (2009). Discovery of the Depths. The Technology Teacher 68 (8) , pp. 12-16.

Katsioloudis, P. (2009). Water Treatment: Keep it Pure. The Technology Teacher 68 (7) , pp. 10-15.

Katsioloudis, P. and Bondi, S. (2009). Energy from the Skies: Empowering Future Generations. The Technology Teacher 68 (6) , pp. 11-18.

Katsioloudis, P. (2009). Biomedical Technology: Supporting Movement. The Technology Teacher 68 (5) , pp. 10-15.

Conference Proceeding

Jovanovic, V., Katsioloudis, P., Djuric, A., Tomovic, M. M. and Stout, T. (2017). Developing a Curriculum for Marine Mechatronics Technicians Columbus,OH: Military and Veterans Constituent Committee Division, 2017 ASEE National Conference.

Tomovic, M. M., Tomovic, C., Jovanovic, V., Yao, N. and Katsioloudis, P. (2017). Integrative Experiences through Modeling and Simulation of Mechatronics Systems Columbus,OH: Military and Veterans Constituent Committee Division, 2017 ASEE National Conference.

Dickerson, D. L., Callis-Duehl, K., Walker-Johnson, G., Wolf, S., McConnell, W., Katsioloudis, P. and Burgin, S. (2017). Impact of the STEM career graph on the perceived inclusion of STEM domains in careers The annual meeting of the National Association of Research in Science Teaching (NARST).

Jones, M. and Katsioloudis, P. (2016). Comparative Analysis of the Impact of Mathematics Achievement on Spatial Visualization Ability in engineering Technology Education Nashua, NH: Proceedings of the 71st Midyear Conference.

Jovanovic, V., Katsioloudis, P., Tompkins, P. M. and Stout, T. (2016). Competencies related to Marine Mechatronics Education New Orleans, LA: Proceedings of the 123nd ASEE Annual Conference & Exposition.

Jovanovic, V., Dean, T., Considine, C., Arcaute, K., Katsioloudis, P. and Tomovic, M. M. (2016). Pilot Programs for Veterans Transition to Engineering Fields New Orleans, LA: Proceedings of the 123nd ASEE Annual Conference & Exposition.

Jovanovic, V., Goris, V. T., Djuric, M. A., Katzenstein, L., Luetke, N. J., Moustafa, M. R. and Matrood, B. (2015). Integration of Mechatronics Design Approach into Teaching of Modeling Practices Seattle, WA: Proceedings of the 122nd ASEE Annual Conference & Exposition.

Jovanovic, V., Mann, M., Katzenstein, L. and Dickerson, D. L. (2014). Fast Fashion and Sustainable Manufacturing Systems Indianapolis, IN: Proceedings of the ASEE National Conference.

Jovanovic, V., Tomovic, M. M., Ncube, L., Katsioloudis, P., Djuric, A. and Cuckoy, F. (2014). Design for Compliance of Mechatronics Systems in Automotive: Material Tracking and Product Data Management Considerations Detroit, MI: Proceedings of the SAE 2014 World Congress & Exhibition.

Chaturvedi, S. K., Yoon, J., mckenzie, R., Katsioloudis, P., Garcia, H. and Ren, S. (2012). Implementation and Assessment of a Virtual Reality Experiment in the Undergraduate Themo-fluids Laboratory Austin, TX.: Proceedings of the American Society for Engineering Education Annual Conference.

Katsioloudis, P. and Judge, S. (2012). Using Virtual Environments to Promote Teacher Preparation Athens, Greece: Proceedings of the Athens Institute for Education and Research Conference Paper Series.

Katsioloudis, P., Watson, G. S., Papelis, Y. E. and Reed, P. A. (2011). An engineering process model for implementing an agent-based paradigm in the development of an educational modeling and simulation application for port logistics: Demonstration of the e-learning product Limassol: Proceedings of the 24th International Congress for School Effectiveness and Improvement Conference.

Katsioloudis, P., Watson, G. S. and Nunnery, J. A. (2011). Technology driven educational reform v.3.0: An engineering design process model for developing educational modeling and simulation applications Limassol: Proceedings of the 24th International Congress for School Effectiveness and Improvement.

Judge, S. and Katsioloudis, P. (2011). The Use of Virtual Environments in Teacher Preparation (pp. 5) Lisbon: World Conference on Educational Multimedia, Hypermedia and Telecommunications (EDMEDIA.

Papelis, Y. E., Watson, G. S., Katsioloudis, P. and Reed, P. A. (2010). Development of a container handling port simulation for demonstrating port related careers Orlando, FL: Proceedings of the Spring Simulation Multiconference.

Katsioloudis, P. (2009). Identification of Quality Indicators for Visual-based Learning Material in Technology Education Progrmas for Grades 7-12 Budapest, Hungary: American Society of Engineering Education Conference Proceedings.

Katsioloudis, P. (2009). Detection and Assessment of Quality Indicators of Visual-based Learning Material in Technology Education Programs for Grades 7-12 Marietta, GA: American Society of Engineering Education Conference Proceedings.

Katsioloudis, P. (2009). Modification of the Conventional Delphi Technique to extend its applicability to Hybrid Environments Austin, TX: American Society of Engineering Education Conference Proceedings.

Katsioloudis, P. (2008). Identification of Quality Indicators of Visual-based Learning Material in Technology Education Programs for Grades 7-12 Pittsburgh, PA: American Society of Engineering Education Conference Proceedings.

Presentations

Victoria, H. and Katsioloudis, P. ( 2017). Living and Working in the Freezer Paper Blast Project Old Dominion University, Norfolk, VA.

Katsioloudis, P. (October , 2017). Impacts of Music on Sectional View Drawing Ability for Engineering Technology Students as measured through Technical Drawings Paper Southeastern Technology Education Association Conference Raleigh, NC.

Katsioloudis, P. (July , 2017). STEM Education and Professional Studies Programs. Keynote/Plenary Address Materials Science Workshop completion ceremony Norfolk, VA.

Katsioloudis, P. (April , 2017). A Comparative Analysis of Surgical Smoke Generation; due to Energy-based Instruments and Implications: a Pilot Causal-Comparative study Keynote/Plenary Address Industrial Hygiene Conference Portsmouth, VA.

Katsioloudis, P. (March , 2017). Application of Visual Cues on 3D Dynamic Visualizations for Engineering Technology Students and Effects on Spatial Visualization Ability: A Quasi-Experimental Study Paper International Technology and Engineering Education Association Conference Dallas, TX.

Jones, M. and Katsioloudis, P. ( 2016). Comparative Analysis of the Impact of Mathematics Achievement on Spatial Visualization Ability in engineering Technology Education Paper 71st Midyear Conference Nashua, NH.

Katsioloudis, P. and Jones, M. ( 2016). Competencies related to Marine Mechatronics Education Paper the annual American Society for Engineering Education New Orleans, LA.

Jovanovic, V., Popescu, O., Katsioloudis, P., Djuric, A. M., Stout, T. and Lagesse, R. R. (November , 2016). Career and Technical Education and Its Relation to Engineering Technology Pathways in Marine Mechatronics Paper 5th IAJC/IASM Joint International Conference Orlando, Florida.

Katsioloudis, P. (July , 2016). STEM Education and Professional Studies Programs Keynote/Plenary Address Materials Science Workshop completion ceremony Norfolk, VA.

Katsioloudis, P. and Jones, M. (March , 2016). Higher Education Pathways for Maritime Mechatronics Technicians (MechTech Paper The annual meeting of the American Society of Naval Engineering Washington, DC.

Jovanovic, V., Katsioloudis, P., Tomovic, M. M. and Stout, T. ( 2015). Higher Education Pathways for Maritime Mechatronics Technicians (MechTech Paper Engineering and Technology Research Expo, ODU’s Batten College of Engineering and Technology. Old Dominion University, Norfolk, VA.

Katsioloudis, P. ( 2015). A Comparative Analysis of Spatial Visualization Ability and Drafting Models for Industrial and Technology Education Students Paper International Technology and Engineering Education Association Conference Milwaukee, WI.

Katsioloudis, P. ( 2015). Comparative Analysis and Prevention of Surgical Smoke Effects Paper South Eastern Technology Education Association Conference Raleigh, NC.

Hathcock, S., Garner, J. K., Dickerson, D. L., Kaplan, A. and Katsioloudis, P. (April , 2015). Professional Identity Interactions and Triggers for Change: A Multiple Case Study of Teachers' Responses to Professional Development Paper The annual meeting of the National Association for Research in Science Teaching Chicago, IL.

McConnell, W., Dickerson, D. L. and Katsioloudis, P. (April , 2015). 3D printing technology as an educational tool for seventh grade students: Do affordances outweigh constraints? Paper The National Association of Research in Science Teaching annual conference Chicago, IL.

Katsioloudis, P. (March , 2015). STEM Education and Implications to the 21st Century Workforce Keynote/Plenary Address Monthly meeting of the Armed Forces Computer and Electronics Association (AFCEA) Norfolk, VA.

Katsioloudis, P. ( 2013). A Comparative Analysis of Point-of-View Modeling for Industrial and Technology Education Courses Paper International Technology and Engineering Education Association Conference Columbus, OH.

Katsioloudis, P. and Judge, S. (May 21, 2012). Using virtual environments to promote teacher preparation 14th Annual International Conference on Education Athens, Greece.

Katsioloudis, P. and Fantz, T. (March 16, 2012). A Comparative Analysis of Preffered Learning Styles International Technology and Engineering Education Association .

Fantz, T. and Katsioloudis, P. (March 14, 2012). Engineering Content Within Technology Teacher Education Programs International Technolgy and Engineering Education Association Conference Long Beach, CA.

Katsioloudis, P. ( 2011). Future critical issues and problems facing technology and engineering education in the Commonwealth of Virginia Paper Southeastern Technology Education Association Conference Boone, NC.

Maydosz, A., Judge, S., Lynch, S. Gear., Floyd, K., Bobzien, J. and Katsioloudis, P. (November 10, 2011). Behavior Management Strategies for General Educators: Trial in a Simulated Classroom 2011 TED Conference Austin, TX.

Maydosz, A., Judge, S., Lynch, S. Gear., Floyd, K., Bobzien, J. and Katsioloudis, P. (September 23, 2011). Behavior Management Strategies for General Educators: Trial in a Simulated Classroom 2011 CCBD International Conference New Orleans, LA.

Ritz, J. and Katsioloudis, P. (July 5, 2011). Comparative Analysis of Student Performance: Technology Education Vs. Engineering PATT 25 London, UK.

Judge, S. and Katsioloudis, P. (June , 2011). The use of virtual environments in teacher education Ed-Media 2011 Conference Lisbon, Portugal.

(January 2, 2011). An engineering process model for implementing an agent-based paradigm in the development of an educational modeling and simulation application for port logistics: Demonstration of the e-learning product International Congress for School Effectiveness and Improvement Conference Limassol, CYPRUS.

Katsioloudis, P. (August 3, 2010). The VisPort Project Opportunity Inc Regional Meeting Norfolk.

Katsioloudis, P. (July 26, 2010). Communication Systems Project SEARCH Summer Academy Portsmouth.

Katsioloudis, P. (July 25, 2010). Engineering Design Process Project SEARCH Summer Academy Portsmouth, VA.

Katsioloudis, P. (July 13, 2010). Visualization of Port Logistcis VisPort Project Final Report Norfolk.

Katsioloudis, P., Watson, G. S. and Papelis, Y. E. (June 30, 2010). VisPort Project Capitol Hill Modeling and Simulation Exhibition Washington, D.C.

Katsioloudis, P. and Dickerson, D. L. (May , 2010). Integrative STEM education: History, implementation, research Nicosia, Cyprus.

Katsioloudis, P. (May 30, 2010). Integrative STEM Education, History and Research University of Cyprus STEM conference Nicosia.

Katsioloudis, P. (March 18, 2010). Visualization for Port Logistics Project International Technology & Engineering Educators Association Charlotte, NC.

Katsioloudis, P. (December 9, 2009). Visualization in Port Logistics Project, VisPort SEVA Port Funded Projects Norfolk, VA.

Skophammer, R. and Katsioloudis, P. (November , 2009). Learning STEM through underwater technology GAITE Engineering Technology Satuday Hamption, VA.

Katsioloudis, P. and Scophammer, R. (November 7, 2009). Learning STEM through Scuba Diving Engineering Technology Exploratory (GAITE) Thoams Nelson Community College.

Katsioloudis, P. (October 30, 2009). Visualization of Port Logistics Project, (VisPort) Maritime Institute Council Meeting Old Dominion University.

Katsioloudis, P. (October 16, 2009). Identification of Quality Indicators for Visual-based Learning Material in Technology Education Programs for Grades 7-12 American Society of Engineering Education, Global Conference Hungary, Budapest.

Katsioloudis, P. (July 16, 2009). Teaching STEM through Scuba Diving GEAR UP Science Project Kaufman Hall.

Katsioloudis, P. (June 15, 2009). Detection and Assessment of Quality Indicators for Visua-based Learning Material in Technology Education Course for Grades 7-12 American Society of Engineering Education, Annual Conference Austin, Texas.

Katsioloudis, P. (April 6, 2009). Enchancing the Collection Process for the Delphi Technique American Society for Engineering Education Southeastern Region Conference Marrietta, GA.

Katsioloudis, P. (March 27, 2009). Design and Construction: Remote Operated Underwater Vehicle International Technology Eduucation Association Annual Conference Louisville, KY.

Katsioloudis, P. (June , 2008). Identification of Quality Indicators of Visual-based Learning Materal in Technology Education Programs for Grades 7-12 National Conference, American Society of Engineering Education Pittsburgh, PA.

Katsioloudis, P. (April , 2008). Identification of Quality Indicators of Visual-based Learning Materal in Technology Education Programs for Grades 7-12 Southeastern Region Conference TN.

Katsioloudis, P. (March , 2007). An Assertion of Standards of Technological Literacy: Cyprus and USA San Antonio, TX.

Katsioloudis, P. (March , 2007). Best Practices in Design and Technology Education Symposium Proposal San Antonio, TX.

Katsioloudis, P. (February , 2007). Biofuels: Ethanol production Salt Lake, UT.

Katsioloudis, P. (February , 2007). Identification of Quality Indicators of Visual-based Learning Materal in Technology Education Programs for Grades 7-12 Salt Lake, UT.

Katsioloudis, P. (February , 2007). The role of Technology Education within the College of Education NCATE Accreditation Session Raleigh, NC.

Katsioloudis, P. (May , 2006). A comparison between the Cypriot Standards of Design and Technology Vs American Standards for Technological Literacy Baltimore, MD.

Katsioloudis, P. (May , 2006). Applications of TRIZ (Inventive Problem Solving) in Technology Education Milwaukee, WI.

Katsioloudis, P. (May , 2004). Invention-Innovation-Inquiry (I3), Units for Technological Literacy, Grades 5-6 Columbus, OH.

• 2017: Distinguished Technology and Engineering Professional, ITEEA
• 2016: 2016 Leaders to Watch Recognition, ITEEA
• 2016: Nominee for President for the International Technology and Engineering Education Association, ITEEA
• 2016: STEM Experts Panel , Fulbright/ US State Department Sponsored Study Abroad Program
• 2015: Engineering Design Graphics Division: The Editor’s Award for the Outstanding Research Paper published in the Engineering Design Graphics Journal, American Society for Engineering Education
• 2015: Shining Star Recognition Award, Division of Student Engagement and Enrollment Services,ODU
• 2013: Achievement Award: Non-Degree Research, Virginia Technology and Engineering Education Association
• 2012: DELOS Best Paper Award, American Society for Engineering Education
• 2011: Instructional Publications Award, Old Dominion University
• 2010: New Investigator Grants Award, College of Education, ODU
• 2008: Regognition as a Twenty-first century leader, Council on Technology Teacher Education
• 2007: Dean’s Citation Award for development of Academic Scholarship , NCSU
• 2006: Donald Maley Spirit of Excellence Outstanding Graduate Student Citation, 68th Annual ITEA conference
• 2004: Donald Maley Spirit of Excellence Outstanding Graduate Student Citation Award, 66th Annual ITEA conference
• 2003: 3rd Place in Competition, TECA
• 2002: Second Place, 64th International Technology Education Association